徐州市久发工程机械有限责任公司

XUZHOU JIUFA CONSTRUCTION MACHINERY CO., LTD.

current location: home page > News > Long news

12-03 How to clean the car crane filter

According to the cleanliness of diesel fuel, the diesel filter generally needs to be cured once every 5-10 days. Just unscrew the screw plug to release the water or remove the water bottle of the pre-filter, pour the impurities and water, clean it and…

According to the cleanliness of diesel fuel, the diesel filter generally needs to be cured once every 5-10 days. Just unscrew the screw plug to release the water or remove the water bottle of the pre-filter, pour the impurities and water, clean it and then install it. . The venting screw plug is installed on the diesel filter cover of the automobile crane to discharge the air in the diesel low pressure pipeline and the diesel filter, and is also equipped with a return valve to ensure a certain pressure and excess in the oil passage. The diesel oil flows back to the mailbox through the return pipe. After the maintenance and cleaning of the diesel tank and the diesel pre-filter, it is usually necessary to use the manual pump of the fuel injection pump to deliver oil and exhaust in the low-pressure oil pipe. When venting, loosen the venting screw plug of the filter, and use the manual oil pump to pump oil continuously, so that the diesel oil containing the bubble will be discharged from the screw plug of the filter outlet until the bubble disappears, and the screw is tightened immediately. Plug, continue to pump oil, until the bubbles in the diesel oil discharged from the screw plug of the car crane filter are completely disappeared, and the diesel continues to emerge. The filter cartridge needs to be replaced every six months or so. When installing, pay attention to the correct and reliable installation of the sealing ring on it, and replace it when it is damaged.

     Xuzhou Jiufa Construction Machinery Co., Ltd. is a national high-tech enterprise specializing in R&D, manufacturing and operation of rough-terrain cranes and other construction machinery products. The company has a complete technical quality assurance management system, and passed the ISO9001 quality management system, ISO18001 occupational health and safety management system certification and CE certification, GOST certification. As the “Engineering Research Center for Off-Road Tire Lifting Equipment” approved by the Science and Technology Department of Jiangsu Province, the company has established and maintained a long-term cooperation relationship with Jilin University. At present, the company has 56 patented technologies, including 15 invention patents and 41 utility model patents. The products mainly include QRY series off-road cranes, QY series truck cranes, DGY series multi-functional pipelayers, TQK series fast-moving self-erecting smart tower machines, self-loading intelligent sanitation vehicles and key parts of engineering machinery. Among them, DGY series multi-functional pipelayer and self-loading intelligent sanitation car have won global invention patents. TQK series fast moving self-erecting smart tower machine is the first product in China.

    The QRY series of cross-country cranes independently developed by the company was recognized as “high-tech products” by the Science and Technology Department of Jiangsu Province and listed by the Ministry of Science and Technology as “National Torch Plan Industrialization Demonstration Project”. This series of models uses computer control technology, CAN bus technology, hydraulic pilot proportional control technology, electronically controlled shifting stepless shifting technology, four-wheel steering positioning detection technology and safety image monitoring system, making it a high-tech electromechanical Instrument integration products. This model adopts self-made special off-road chassis, imported axles, gearbox, four-wheel drive and synchronous steering, with high power and high passability. This model is fully hydraulic and can realize continuous stepless speed change, crab line and heavy load. This model is suitable for construction in the field of complex road conditions such as mountains and mines. It is also suitable for operation in small sites such as ports and freight yards. It can meet the special needs of different users in various industries for on-site lifting and construction operations.

    The company was founded in 2002 with a registered capital of 76 million yuan and a total investment of 300 million yuan. The company covers an area of more than 300 acres, and now has more than 100,000 square meters of standardized industrial plants and more than 9,000 square meters of scientific research buildings, more than 7,000 square meters of comprehensive trade buildings. Since its establishment, the company has successively invested in the purchase of flame cutting machines, laser cutting equipment, fine plasma cutting machines, large shearing machines, large leveling machines, large tonnage presses, 2500 tons of large-scale CNC bending machines and digital display. Horizontal double-sided boring and milling machine, Lincoln welding machine, standardized painting line, three-coordinate detector, welding flaw detector and other advanced machining and testing equipment, with an annual output of more than 3,000 sets of large-scale construction machinery and equipment production organization and processing capabilities.

    The company is located in the industrial park of Da Peng Town, Tongshan District, Xuzhou City, Jiangsu Province, which is the capital of China's construction machinery. It is close to the 310 National Highway and the west exit of Xuzhou Ring Expressway. It has excellent parts and components procurement market environment and developed convenience. Traffic location. At present, more than 95% of the company's main QRY series of cross-country crane products are exported to foreign countries, mainly to more than 30 countries and regions such as Africa, South America, Middle East, West Asia, Southeast Asia and the Commonwealth of Independent States. For more details, please visit our official website http://www.xzjiufa.com/cn/


  • | Three major reasons for overheating of car crane engines

  • The main reason for the sinking of the mobile tower chassis |

  • Long news
  • Industry consultation
  • media coverage

徐州市久发工程机械有限责任公司

XUZHOU JIUFA CONSTRUCTION MACHINERY CO., LTD.